Oven Device¶
Tip: Use this navigation sections and page links to navigate easier.
Description¶
Oven appliance.
| Label | Value |
|---|---|
| Device Type | cloud.smarthq.device.oven |
| Connection Type | cloud.smarthq.connection.wifi |
| Icon Type | cloud.smarthq.icon.oven |
Alerts¶
AlertType |
Description | Interval |
|---|---|---|
cloud.smarthq.alert.cooking.burner.bad.pan.center.front |
Wondering if you are getting the most from your cooktop and cookware? | |
cloud.smarthq.alert.cooking.burner.bad.pan.center.rear |
Wondering if you are getting the most from your cooktop and cookware? | |
cloud.smarthq.alert.cooking.burner.bad.pan.left.front |
Wondering if you are getting the most from your cooktop and cookware? | |
cloud.smarthq.alert.cooking.burner.bad.pan.left.rear |
Wondering if you are getting the most from your cooktop and cookware? | |
cloud.smarthq.alert.cooking.burner.bad.pan.right.front |
Wondering if you are getting the most from your cooktop and cookware? | |
cloud.smarthq.alert.cooking.burner.bad.pan.right.rear |
Wondering if you are getting the most from your cooktop and cookware? | |
cloud.smarthq.alert.cooktop.on |
Your cooktop is On. | |
cloud.smarthq.alert.cooktop.on.minutes.60 |
Your cooktop has been on for 60 minutes. | |
cloud.smarthq.alert.endofcycle.preheat.center.front.burner |
Precision Cooking Preheat Done. Please open app to continue cooking. | |
cloud.smarthq.alert.endofcycle.preheat.center.rear.burner |
Precision Cooking Preheat Done. Please open app to continue cooking. | |
cloud.smarthq.alert.endofcycle.preheat.left.front.burner |
Precision Cooking Preheat Done. Please open app to continue cooking. | |
cloud.smarthq.alert.endofcycle.preheat.left.rear.burner |
Precision Cooking Preheat Done. Please open app to continue cooking. | |
cloud.smarthq.alert.endofcycle.preheat.right.front.burner |
Precision Cooking Preheat Done. Please open app to continue cooking. | |
cloud.smarthq.alert.endofcycle.preheat.right.rear.burner |
Precision Cooking Preheat Done. Please open app to continue cooking. | |
cloud.smarthq.alert.endofcycle.sousvide |
Your Food is ready. Enjoy! | |
cloud.smarthq.alert.endofcycle.timer.autooff |
Your oven has now been turned off. | |
cloud.smarthq.alert.endofcycle.timer.autooff.lower |
Your oven has now been turned off. | |
cloud.smarthq.alert.endofcycle.timer.burner |
The programmable burner shutdown time is over. | |
cloud.smarthq.alert.endofcycle.timer.cook |
Your cook time has been achieved and your oven has been turned off. | |
cloud.smarthq.alert.endofcycle.timer.cook.lower |
Your cook time has been achieved and your oven has been turned off. | |
cloud.smarthq.alert.fault.control |
Shut off due to control error. Turn breaker off, then on. Call service if issue persists. Code F6.X 800-GE-CARES | |
cloud.smarthq.alert.fault.coolingfan |
Oven is not operational. Unit cannot be used until repaired. Code F9.X 800-GE-CARES | |
cloud.smarthq.alert.fault.doorlock |
Oven is not operational. Unit cannot be used until repaired. Code F9.X 800-GE-CARES | |
cloud.smarthq.alert.fault.keystuck |
A control panel button is stuck. The button will not function until repaired. Code F7.X 800-GE-CARES | |
cloud.smarthq.alert.fault.meatprobe |
Probe error. Push Cancel, unplug probe, retry setup. Call service if issue persists. Code F4.X 800-GE-CARES | |
cloud.smarthq.alert.fault.overheat |
For unknown reason, oven temperature has exceeded preset threshold. Discontinue use until serviced. Code F2.X 800-GE-CARES | |
cloud.smarthq.alert.fault.sensor |
Cannot calibrate temperature. Perform calibration on unit, or call service. Code F3.X 800-GE-CARES | |
cloud.smarthq.alert.endofcycle.timerexpired.kitchen |
Your oven's kitchen timer is complete. | |
cloud.smarthq.alert.endofcycle.timerexpired.kitchen.lower |
Your oven's kitchen timer is complete. | |
cloud.smarthq.alert.endofcycle.probe.reach |
The internal temperature of your food has reached its set temperature. | |
cloud.smarthq.alert.endofcycle.probe.reach.lower |
The internal temperature of your food has reached its set temperature. | |
cloud.smarthq.alert.cooktime.hoursactive.6 |
Your oven has been on for over 6 hours. | |
cloud.smarthq.alert.cooktime.hoursactive.6.lower |
Your oven has now been running for 6 hours. | |
cloud.smarthq.alert.cooktime.hoursactive.6 |
Your oven has now been running for 6 hours. | |
cloud.smarthq.alert.endofcycle.preheat |
Your Oven's Preheat is Complete. | |
cloud.smarthq.alert.endofcycle.preheat.lower |
Your Oven's Preheat is Complete. | |
cloud.smarthq.alert.endofcycle.preheat.lower |
The oven is ready to start cooking. | |
cloud.smarthq.alert.endofcycle.preheat |
The oven is ready to start cooking. | |
cloud.smarthq.alert.endofcycle.sensor.reach |
You can now remove the food from the oven. | |
cloud.smarthq.alert.endofcycle.sensor.reach.lower |
You can now remove the food from the oven. | |
cloud.smarthq.alert.endofcycle.timer.steam.clean |
Steam Clean has finished. | |
cloud.smarthq.alert.tank.water.empty |
Refill the water tank to continue steam cooking. | |
cloud.smarthq.alert.tank.water.empty.lower |
Refill the water tank to continue steam cooking. | |
| Common Alerts List | A list of alerts common across all SmartHQ devices that this device might support. |
Service Alerts¶
AlertType |
Description |
|---|---|
cloud.smarthq.alert.fault.controller.clock.speed |
The MCU internal clock speed supervisor have a failure. |
cloud.smarthq.alert.fault.coolingfan.cavity1.on |
The Range or Primary WO Cooling Fan unexpected a operation fault. |
cloud.smarthq.alert.fault.coolingfan.cavity1.speed |
There is a range or primary WO Cooling Fan Speed Fault. |
cloud.smarthq.alert.fault.coolingfan.cavity2.speed |
The secondary Cooling Fan Speed have a fault. |
cloud.smarthq.alert.fault.cycle.cavity1.stillrunning |
The oven cavity 1 (or single) does not stop cooking within 500ms of pressing the cavity 1 (or single) cancel key. |
cloud.smarthq.alert.fault.cycle.cavity2.stillrunning |
The oven cavity 2 (or single) does not stop cooking within 500ms of pressing the cavity 2 (or single) cancel key. |
cloud.smarthq.alert.fault.doorlock.cavity1.failure |
The cavity 1 door lock failed to change to expected state. |
cloud.smarthq.alert.fault.doorlock.cavity1.unexpected |
The cavity 1 door lock changed states unexpectedly. |
cloud.smarthq.alert.fault.doorlock.cavity1.unknown |
The cavity 1 door lock is in an unknown state. |
cloud.smarthq.alert.fault.doorlock.cavity2.failure |
The cavity 2 door lock failed to change to expected state. |
cloud.smarthq.alert.fault.doorlock.cavity2.unexpected |
The cavity 2 door lock changed states unexpectedly. |
cloud.smarthq.alert.fault.doorlock.cavity2.unknown |
The cavity 2 door lock is in an unknown state. |
cloud.smarthq.alert.fault.doorswitch.cavity1.stuckopen |
The cavity 1 door detected as open when locked. |
cloud.smarthq.alert.fault.doorswitch.cavity2.stuckopen |
The cavity 2 door detected as open when locked. |
cloud.smarthq.alert.fault.element.runaway.cavity1.unlocked |
The Cavity 1 extended thermal runaway it's unlocked. |
cloud.smarthq.alert.fault.heating.cavity1.malfunction |
The Cavity 1 heating element relay in unexpected state. |
cloud.smarthq.alert.fault.heating.cavity2.malfunction |
The Cavity 2 heating element relay in unexpected state. |
cloud.smarthq.alert.fault.key.cancel.error |
The cancel key scanning mismatch - OBC1 Only. |
cloud.smarthq.alert.fault.key.cancel.keystuck |
Any RC17/RC19/OBC1/OBC2 cancel key is stuck for 30 seconds. |
cloud.smarthq.alert.fault.key.warmingzone.cancel.error |
The Warming Zone starts without key sequence. |
cloud.smarthq.alert.fault.key.warmingzone.cancel.keystuck |
The Cooktop it's stuck. |
cloud.smarthq.alert.fault.keypress.selfclean.cavity1.start |
The Cavity 1 self clean started without 2 key inputs. |
cloud.smarthq.alert.fault.keypress.selfclean.cavity2.start |
The Cavity 2 self clean started without 2 key inputs. |
cloud.smarthq.alert.fault.keypress.warmingzone.start |
The Warming Zone started without 2 key inputs. |
cloud.smarthq.alert.fault.keystuck |
If button is depressed for 1 minute, it will be logged as a stuck button. |
cloud.smarthq.alert.fault.miswire.cavity1 |
Range or Primary WO Miswire detected after 10 mins. |
cloud.smarthq.alert.fault.miswire.cavity2 |
Secondary WO Miswire detected within first 10 mins. |
cloud.smarthq.alert.fault.powerloss.recovery |
There is a power loss recovery circuit failure. |
cloud.smarthq.alert.fault.temperature.runaway.cavity1.locked |
The Cavity 1 Thermal Runaway it's Locked. |
cloud.smarthq.alert.fault.temperature.runaway.cavity1.unlocked |
The Cavity 1 extended thermal runaway it's unlocked. |
cloud.smarthq.alert.fault.temperature.runaway.cavity2.unlocked |
The Cavity 2 extended thermal runaway it's unlocked. |
cloud.smarthq.alert.fault.thermistor.cavity1.analogdigital |
The range or primary WO Internal ADC diagnostic a failure. |
cloud.smarthq.alert.fault.thermistor.cavity1.open |
The RTD1 sensor open-circuit detected (Lower/Single Cavity). |
cloud.smarthq.alert.fault.thermistor.cavity1.short |
The RTD1 sensor short-circuit detected(Lower/Single Cavity). |
cloud.smarthq.alert.fault.thermistor.cavity2.analogdigital |
The secondary WO Internal ADC diagnostic a failure. |
Services¶
This device may not support each service listed. What is listed is all the possible services for this device. Learn more
Services |
Description |
|---|---|
| Oven Sabbath Toggle Service | Oven sabbath mode. |
| Common Services List | A list of services common across all SmartHQ devices that this device might support. |
Oven Sabbath Toggle Service¶
Description: Oven sabbath mode.
Tuple: Controls sabbath mode on an appliance
| Attribute | Value | Description |
|---|---|---|
| ServiceType | cloud.smarthq.service.toggle | Service to model a binary state that can be read only or remotely controlled |
| DomainType | cloud.smarthq.domain.sabbath |
The sabbath |
| ServiceDeviceType | cloud.smarthq.device.appliance |
An appliance |
Commands¶
| Command | Description |
|---|---|
| cloud.smarthq.command.toggle.set | Toggle sabbath mode on the oven. |